Quick Guide To Basic System Functions - Honeywell VISTA-20PSeries User Manual

Quick Guide to Basic System Functions

FUNCTION PROCEDURE
Check Zones Press READY key.
Arm System Enter code. Press arming key desired:
(AWAY, STAY, NIGHT-STAY, MAXIMUM,
INSTANT)
Quick Arm Press #. Press arming key desired:
(if programmed) (AWAY, STAY, MAXIMUM, INSTANT)
Bypass Zone(s)
Enter code. Press BYPASS key.
Enter zone number(s) to be bypassed
(use 2-digit entries).
Quick Bypass Enter code. Press BYPASS key + [#].
(if programmed)
Silence Sounders
Burglary:
Enter code. Press OFF key.
Fire:
Press OFF key.
"Check":
Press any key.
Disarm System Enter code. Press OFF key.
Clear Alarm
After disarming, enter code again.
Memory
Press OFF key again.
Duress (if active
Arm or disarm "normally," but use your 4-
and connected to
digit Duress code to do so.
Central Station)
Panic Alarms Press key [A], [B], or [C] for at least 2
(as programmed) seconds, or key pairs 1 +
respectively.
Chime Mode To turn ON or OFF: Enter code. Press
CHIME key.
Test Mode To turn ON: Enter code. Press TEST key.
To turn OFF: Enter code. Press OFF key.
Phone Access
Consult Phone Access User's Guide that
if applicable
accompanies the Phone Module.
– 50 –
COMMENTS
View faulted zones when system not
ready.
Arms system in mode selected.
Arms system in mode selected, quickly
and without use of a code.
Bypassed zones are unprotected and
will not cause an alarm if violated.
Bypasses all faulted zones
automatically.
Also disarms system. Memory of alarm
remains until cleared.
Memory of Alarm remains until
cleared.
Determine cause.
Also silences sounders. Memory of
alarm remains until cleared.
Keypad beeps rapidly on entry if alarm
has occurred while absent. Alarm
display will remain upon disarming
until cleared.
Performs desired action and sends
silent alarm to Central Station.
See the Panic Keys section for
; emergency functions programmed for
✱ ✱ + #, or 3 + #
your system. Note: Keys "A", "B", and
"C" may have been programmed for
other functions.
The keypad will sound if doors or
windows are violated while system is
disarmed and chime mode is ON.
Tests alarm sounder and allows
sensors to be tested.
Permits system access remotely, via
Touch-tone phone.