Quick Guide To Fire System Functions - Honeywell VISTA-32FBPT User Manual

ACTION
Displaying Event
Silencing Fire Alarms
Resetting Alarms
Silencing Troubles and
Supervisory Conditions
Resetting Troubles and
Supervisory Conditions

Quick Guide to Fire System Functions

PROCEDURE
The system is programmed to lock the keypad display with the first event that
occurred in priority order.
1. Fire – highest priority
2. Life Safety
3. Troubles and Supervisory
4. System Events (i.e. low battery) – lowest priority
To display the next event, press the [
To revert to the first event displayed, press the # key.
Enter User Code +1 (OFF). This will silence the keypad, but may or may not
silence the fire bells, depending on system programming. A second User Code
+ 1 (OFF) sequence may be required. The Silenced LED on the 6160CR-2
keypad will light.
To reset alarms, enter User Code + 1 (OFF) a second time. This will clear
alarms from memory.
To Silence Troubles or Supervisory Conditions, enter User Code +1 (OFF). The
corresponding LED on the 6160CR-2 keypad will light.
Troubles and supervisory conditions automatically reset when the condition is
cleared if programmed by your installer. Otherwise reset the condition by
entering Code + 1 (OFF).
] key. Repeat as necessary.
∗
– 65 –