To Delete A User - Honeywell ADEMCO VISTA-40 User Manual

Security Codes & Authority Levels (cont'd)

To Delete a User

1. Enter Master or Manager code and press the
be deleted.
2. Enter Master or Manager code first entered.
OK TO DELETE
0 = NO , 1 = YES
USER CODE
DELETED
The system will recognize that the User number
is already in use and will prompt to confirm that
it should be deleted. Press 0 (NO) or 1 (YES).
If yes, that user's code will be removed from all
partitions to which it was assigned, and all
authorization levels and other information about
that user will be deleted. Note that a user can
only be deleted from the partition in which it was
first assigned, and can only be deleted by a user
with a higher authority level. A User's security
code cannot be deleted by oneself.
CODE
8 key + user number to
– 19 –