Setting The Av Input; Switching The Ever Scroll - Pioneer DVH-P4150UB Operation Manual

Operating this unit
Switching the auxiliary 1 setting
1 Use MULTI-CONTROL to select AUX1 in
the initial setting menu.
Refer to Adjusting initial settings on page 43.
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Turn MULTI-CONTROL to select the de-
sired setting.
! AUDIO – auxiliary device connected with
stereo mini plug cable
! VIDEO – auxiliary video device connected
with a 4-pole mini plug cable (e.g., CD-
V150M)
! OFF – No auxiliary device is connected
# You can also perform the same operations by
pressing a or b.
4 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been canceled before
determination, operation is settled.
Switching the auxiliary 2 setting
1 Use MULTI-CONTROL to select AUX2 in
the initial setting menu.
Refer to Adjusting initial settings on page 43.
2 Press MULTI-CONTROL to turn AUX2
on.
# To turn AUX2 off, press MULTI-CONTROL
again.

Setting the AV input

You can connect AV components to the AV
input with an RCA cable.
Switch the AV input setting according to the
connected AV component.
For more details, refer to the installation man-
ual.
! Select EXT-VIDEO to watch video of a con-
nected video unit as EXTERNAL source.
! Select AUX to watch video of an auxiliary
device as AUX2 source.
1 Use MULTI-CONTROL to select VIDEO IN
in the initial setting menu.
Refer to Adjusting initial settings on page 43.
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Turn MULTI-CONTROL to select the de-
sired setting.
! OFF – No video component connected
! EXT-VIDEO – External video unit (such as
Pioneer products available in the future)
! AUX – Auxiliary device
# To watch video of AUX source, set auxiliary 2
setting on. For details, refer to Switching the aux-
iliary setting on the previous page.
# You can also perform the same operations by
pressing a or b.
4 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been canceled before
determination, operation is settled.

Switching the ever scroll

When Ever Scroll is set to ON, recorded text in-
formation scrolls continuously in the display.
Set to OFF if you prefer the information to
scroll just once.
1 Use MULTI-CONTROL to select SCROLL
in the initial setting menu.
Refer to Adjusting initial settings on page 43.
2 Press MULTI-CONTROL to display the
setting mode.
# Press DISP/BACK/SCRL to return to the pre-
vious display.
3 Turn MULTI-CONTROL to select the de-
sired setting.
EVER (ever)—OFF (off)
CRB2932-A/N
<
Section
02
45
En
>45