Switching The Information Display; Ipod; Basic Operations - Pioneer DVH-P4150UB Operation Manual

Operating this unit

Switching the information display

The operation is the same as that of the built-
in DVD player.
Refer to Switching the information display on
page 27.

iPod

You can control and play songs/videos on an
iPod.
! For details about the supported iPod, refer
to iPod compatibility on page 74.
! When playing songs on an iPod, iPod Dock
Connector to USB Cable is required.
! If an iPod with video capabilities is con-
nected to this unit via interface cable (e.g.
CD-IU50V), which is sold separately, you
can enjoy the video contents of the iPod as
the IPOD source. You need not change the
setting of AUX1 and AUX2.

Basic Operations

% Connecting an iPod
1 Plug an iPod into the USB port/USB port
and AUX input.
! When playing songs on an iPod, plug an
iPod into the USB port using the iPod
Dock Connector to USB Cable.
! When playing videos on an iPod with
video capabilities, plug an iPod into the
USB port and AUX input using an inter-
face cable (e.g., CD-IU50V).
For details on the position of the USB port
and AUX input, refer to Head unit on page
9.
2 Press SRC/OFF to select USB-IPOD as a
source.
Playback will start.
% Fast forwarding or reversing
Press and hold c or d.
% Selecting a song/video/chapter
Press c or d.
% Disconnecting an iPod
Pull out the iPod Dock Connector to USB
Cable or the interface cable.
Notes
! Read the precautions for iPod in the following
section. Refer to page 74.
! While iPod is connected to this unit, PIONEER
(or (check mark)) is displayed on the iPod.
CRB2932-A/N
<
Section
02
31
En
>31