Setting The Down Sampling Output; Initial Settings; Adjusting Initial Settings; Setting The Clock - Pioneer DVH-P4150UB Operation Manual

Operating this unit
! Make a note of the code as you will need it
when you register with a DivX VOD provider.
# Pressing RETURN takes you back to the pre-
vious display.

Setting the down sampling output

If the sampling frequency of the audio is more
than 96 kHz, the audio outputted from the digi-
tal output of this unit can be reduced to 48
kHz. Normally, set the down sampling output
to on. If this unit's digital output is not used,
there is no need to change settings.
1 Move the thumb pad up or down to se-
lect SAMPLING OUTPUT in GEN.
2 Click the thumb pad.
Each time you click the thumb pad the se-
lected setting switches on or off.
# Pressing RETURN takes you back to the pre-
vious display.

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Press SRC/OFF and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3 Turn MULTI-CONTROL to select one of
the initial settings.
CLOCK SET (clock)—FM STEP (FM tuning
step)—AM STEP (AM tuning step)—AUX1
(auxiliary input1)—AUX2 (auxiliary input2)—
VIDEO IN (AV input setting)—SCROLL (ever
scroll)—COLOR SYS (DVD output signal set-
ting)—V.OUT (display connection)—
DIGITALATT (digital attenuation)—RESET
(audio reset)
Use the following instructions to operate each
particular setting.
Notes
! You can also select the function by pressing
FUNCTION on the remote control.
! To return to the previous display, press
DISP/BACK/SCRL.
! To cancel initial settings, press BAND/ESC.
! When V.OUT is set to ON, you cannot switch
to SCROLL.
! When the multi-channel processor (DEQ-
P7650/DEQ-P6600) is connected to this unit,
you can operate DIGITALATT and RESET.

Setting the clock

Use these instructions to set the clock.
1 Use MULTI-CONTROL to select
CLOCK SET in the initial setting menu.
Refer to Adjusting initial settings on this page.
CRB2932-A/N
<
Section
02
43
En
>43