Adjusting The Volume; Tuner; Basic Operations; Storing And Recalling Broadcast Frequencies - Pioneer DVH-P4150UB Operation Manual

Operating this unit
! External unit refers to a Pioneer product (such
as ones available in the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can be controlled with this unit. When
two external units are connected, the external
unit is automatically allocated to external unit
1 or external unit 2 by this unit.
! When this unit's blue/white lead is connected
to the car's auto-antenna relay control term-
inal, the car's antenna extends when this
unit's source is turned on. To retract the an-
tenna, turn the source off. (When you con-
nected a Pioneer multi-channel processor
(DEQ-P7650/DEQ-P6600) to this unit, auto-an-
tenna cannot be controled.)

Adjusting the volume

% Turn VOLUME to adjust the sound
level.
# With the remote control, press VOLUME to in-
crease or decrease the volume.

Tuner

Basic Operations

% Selecting a band
Press BAND/ESC.
# Band can be selected from among FM1, FM2,
FM3 or AM.
% Manual tuning (step by step)
Press c or d.
% Seeking tuning
Press and hold c or d, and then release.
# You can cancel seek tuning by briefly pressing
c or d.
# While pressing and holding c or d, you can
skip stations. Seek tuning starts as soon as you
release c or d.
Storing and recalling broadcast
frequencies
If you press any of the preset tuning buttons 1/
S.Rtrv/DVD MENU to 6/
easily store up to six broadcast frequencies for
later recall with the touch of a button.
! Six stations for each band can be stored in
memory.
% When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1/S.Rtrv/DVD MENU to
6/ /ANGLE and hold until the preset
number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
The next time you press the same preset tun-
ing button the radio station frequency is re-
called from memory.
# You can also recall radio station frequencies
assigned to preset tuning numbers by pressing a
or b during the frequency display.
CRB2932-A/N
<
Section
02
/ANGLE you can
15
En
>15