Setting The Divx Subtitle File; Setting For Digital Output; Displaying Your Divx Vod Registration Code - Pioneer DVH-P4150UB Operation Manual

Section
Operating this unit
02
4 Move the thumb pad left or right to
move the cursor to the previous or next po-
sition.
5 Click the thumb pad after entering the
four digit code number.
This enters the code number, and you can now
change the level.
# If you input an incorrect code number, the
icon is displayed. Input the correct code num-
ber.
# If you forget your code number, refer to If you
forget your code number on this page.
6 Move the thumb pad left or right to se-
lect the desired level.
7 Click the thumb pad.
The parental lock level is set.
# Pressing RETURN takes you back to the pre-
vious display.
If you forget your code number
Please see the following section, and press
CLEAR 10 times in the parental lock setting
menu. Refer to Changing the level on the pre-
vious page. The registered code number is
canceled, letting you register a new one.

Setting the DivX subtitle file

You can select whether to display DivX exter-
nal subtitles or not.
! DivX subtitles will be displayed even when
this setting is on if no DivX external subtitle
files exist.
1 Move the thumb pad up or down to se-
lect DivX SUBTITLE in GEN.
2 Click the thumb pad to select whether
to display DivX external subtitles or not.
! ORIGINAL – Display the DivX subtitles
! CUSTOM – Display the DivX external subti-
tles
# Pressing RETURN takes you back to the pre-
vious display.
42
En
Notes
! Up to 42 characters can be displayed on one
line. If more than 42 characters are set, the
line breaks and the characters are displayed
on the next line.
! Up to 126 characters can be displayed on one
screen. If more than 126 characters are set,
the excess characters will not be displayed.

Setting for digital output

Audio which is outputted from digital output
of this unit can be selected. Normally, set to
STREAM. If this unit's digital output is not
used, there is no need to change settings.
! Selecting Linear PCM enables you to
switch the output channel if playing the fol-
lowing type of discs. (Refer to Selecting
audio output on page 26.)
— Dual mono mode DVD video discs
— Bilingual DVD-VR discs
1 Move the thumb pad up or down to se-
lect IEC DIGITAL OUTPUT in GEN.
2 Click the thumb pad to select the de-
sired digital output setting.
! STREAM – The Dolby Digital/DTS signal is
output as it is (initial setting)
! Linear PCM – The Dolby Digital/DTS signal
is converted to and output as a linear PCM
signal
# Pressing RETURN takes you back to the pre-
vious display.
Displaying your DivX
registration code
In order to play DivX VOD (video on demand)
content on this unit, you first need to register
the unit with your DivX VOD content provider.
You do this by generating a DivX VOD registra-
tion code, which you submit to your provider.
1 Move the thumb pad up or down to se-
lect DivX VOD in GEN.
2 Click the thumb pad.
Your 8-digit registration code is displayed.
CRB2932-A/N
<
®
VOD
>42