Setting The On Screen Display Language; Setting The Character Set; Setting The Angle Icon Display; Setting The Aspect Ratio - Pioneer DVH-P4150UB Operation Manual

Section
Operating this unit
02
Setting the on screen display
language
You can set the preferred language for infor-
mation display, DVD setup menu and list dis-
play etc.
1 Move the thumb pad up or down to se-
lect OSD LANGUAGE in LANG.
2 Click the thumb pad.
An on screen display language menu is dis-
played.
3 Move the thumb pad up or down to se-
lect the desired on screen display lan-
guage.
4 Click the thumb pad.
The on screen display language is set.
# Pressing RETURN takes you back to the pre-
vious display.

Setting the character set

You can set the preferred character set for
DivX subtitle file, information display and list
display.
1 Move the thumb pad up or down to se-
lect CHARACTER SET in LANG.
2 Click the thumb pad.
A character set setting menu is displayed.
3 Move the thumb pad up or down to se-
lect the desired character set.
4 Click the thumb pad.
The character set is set.
# Pressing RETURN takes you back to the pre-
vious display.

Setting the angle icon display

You can set it up so that the angle icon ap-
pears on scenes where the angle can be
switched.
1 Move the thumb pad up or down to se-
lect ANGLE ICON DISPLAY in PICT.
40
En
2 Click the thumb pad to select on or off.
Each time you click the thumb pad the se-
lected setting switches on or off.
# Pressing RETURN takes you back to the pre-
vious display.

Setting the aspect ratio

There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TV aspect
for the display you use.
! When using a regular display, select either
LETTER BOX or PANSCAN. Selecting 16:9
may result in an unnatural picture.
1 Move the thumb pad up or down to se-
lect TV ASPECT in PICT.
2 Click the thumb pad.
TV aspect menu is displayed.
3 Move the thumb pad up or down to se-
lect the desired TV aspect.
! 16:9 – Wide screen picture (16:9) is dis-
played as it is (initial setting)
! LETTER BOX – The picture is the shape of a
letterbox with black bands at the top and
bottom of the screen
! PANSCAN – The picture is cut short at the
right and left of the screen
4 Click the thumb pad.
The selected TV aspect is set.
# Pressing RETURN takes you back to the pre-
vious display.
Notes
! When playing discs that do not specify
PANSCAN, playback is with LETTER BOX even
if you select PANSCAN setting. Confirm
whether the disc package bears the
mark.
! Some discs do not enable changing of the TV
aspect. For details, refer to the disc's instruc-
tions.
CRB2932-A/N
<
16 : 9 LB
>40