4.1.2 Programming Methods - Panasonic KX-TD308 Installation Manual

4.1.2 Programming Methods

Advancing to the next stage
Rotatiod of jack number
Note
Storing your data
* Confirmation tone (one beep)
* Alarm tone (three beeps)
Making another selection within the same program address
When "SYS-PGM NO? +" is displayed, you can select one of the
following:
To go to program [000], press the
l
To go to another program, enter the 3-digit program address.
l
Each jack of the Digital Super Hybrid System supports the
connection of a digital proprietary telephone and a single line
device with different extension numbers (extra Device Port: XDP
function). To program this function it is necessary to assign two
parts for each jack. The first part of jack one is l-l. The second
part of jack one is 1-2. The first part of jack two is 2-l and so on.
NEXT PREV
The and
jack as required in programs [003], [004] and [601] through [609].
Example;
NEXT
#l-l
The first part of a jack is for a DPT of a XDP-assigned jack. The second
part is for a single line device. Program [600] "Extra Device Port"
assigns which jacks are XDF?
STORE
Press to store your data.
STORE
The indicator lights red and a confutation tone is
l
emitted.
STORE,
After pressing
that storage is completed.
If you hear this alarm, your entry is not valid.
To make the next higher selection, press
l
To make the previous selection, press
l
To make a specific selection, press
l
number.
NEXT
button.
buttons can be used to move from jack to
NEXT NEXT
you will hear a beep. This informs you
NEXT.
PREV.
SELECT
and then enter the
System Programming 4-7