Dil 1: 1 Extension - Day / Night - Panasonic KX-TD308 Installation Manual

4 6 Outside Line Programming
l
Description
Selection
Default
Programming
Conditions
Feature References
The Direct In Lines (DIL) 1: 1 feature allows incoming outside calls
to be directed to a specific extension. When an outside line is
assigned as DIL 1: 1, it is necessary to assign the destination. These
programs specify the extension number for day or night mode.
Outside line (CO) number:
l
2 through 4 digits / Disable
Extension number:
l
All outside lines - Disable - Day / Night
1. program address (407 for day or 408 for night).
Enter a
Display example: 407 DIL 1:l DAY
2. Press NEXT.
Display: CO Line NO?+
3. an outside line number.
Enter
To enter outside line number 1, you can also press NEXT.
Display example: COl:Disable
4. an extension number.
Enter
To change the current entry, press CLEAR and enter the new number.
To disable. DIL 1: 1, press CLEAR.
5. STORE.
Press
6.
To program another outside line, press
SELECT
and the desired
7.
Repeat steps 4 through 6.
Press END.
8.
To assign all outside lines to one selection, press the * key in step 3.
l
In this case, the display shows the contents programmed for outside line
1.
You set the extension numbers in program [003] "Extension
l
Set" or floating numbers of pager and DISA message in program [8 131
"Floating Number Assignment".
If an outside line is also programmed for DIL 1 :N in programs
l
it is regarded as a DIL 1: 1 line.
Section 3, Features
Direct In Lines (DIL)
Direct Inward System Access (DISA)
1 through 3,
(no DIL 1: 1)
NEXT
or
outside line number.
Night Service
System Programming
PREV,
or
Number
4-101