Account Code Entry - Panasonic KX-TD308 Installation Manual

Features

Account Code Entry

Description
Conditions
An Account Code is used to identify incoming and outgoing
outside calls for accounting and billing purposes. The account code
is appended to the Station Message Detail Recording (SMDR) call
record. For incoming outside calls, account codes are optional. For
outgoing outside calls, there are three modes available to enter an
account code: Verified-All Calls mode; Verified Toll Restriction
Override mode; and Option mode. One mode is selected for each
extension on a Class of Service basis.
In Verified-All Calls mode, the user must always enter a pre-
assigned account code when making any of the following calls
unless it has previously been stored in memory.
Call Forwarding - to Outside Line
l
Last Number Redial
l
Line Access
l
One-Touch Dialing
l
Pickup Dialing
l
Saved Number Redial
l
Station Speed Dialing
l
System Speed Dialing
l
In Verified-Toll Restriction Override mode, the user can enter a pre-
assigned account code only when the user needs to override toll
restriction.
In Option mode, the user can enter any account code if needed.
An account code can be stored into Memory Dialing (System / Station
l
Speed Dialing; One-Touch Dialing; Pickup Dialing; Call Forwarding -
to Outside Line).
. The Account button may be used in place of the feature number. A
flexible button on the proprietary telephone set can be programmed as
the Account button.
Account code entry after CPC detection must be done within 15
l
seconds. Otherwise, SMDR call record is activated and entry becomes
impossible afterwards.
If disconnection signal is selected in program [990], field (3), the
l
Verified-All Calls extension is allowed to make an outside call using the
same line with Flash function.
In any mode, emergency dial numbers stored in program [334]
l
"Emergency Dial Number Set" can be dialed out without an account
code entry.
A
Features