[02] &ECT]
[MEMORY]
[END]
Description
Conditions
You can select the class service which is free
from
the speed dialing toll restriction.
Programming
1. Dial (02).
"CLASS 1" will be displayed and blink.
2. Keep pressing the SELECT
button until the
desired class is displayed.
3. Press rke MEMORY
button.
4. To return to the initial programming
mode,
press the END button.
Ifyou
set boundaries to CLASS2, thesystem will
allow system speed dialing on service class 1 and
class 2, but restrict on service class 3 according
to the toll restriction checking.
Refer to page 27.
Programming
Table
See page 36.