Pulse/Tone Conversion; Time Setting - Panasonic EASA-PHONE KX-T61610 Installation Manual

DIAL THE
PHONE
NUMBER
Description .
When rhe dialing mode is required to change a
pulse mode to a tone mode in one dialing
sequence, this feature is used.
(e.g. computer-accessed lollg disrailce service )
Operation
: ,; ;
'i.
1. Dial the phone number. (prrlse Inode) . . :.i: :.:
2. Dial (++ #).
3. Dial the phone number. (tone nlode)
Conditions
e When you dial using this feature, you must use
Ihe line set to a pulse mode.
Phone number after dialing "X #" will change
'to tone mode.
Example: Computer-accessed long distance service
0 L&al access telephone number of the alternare
lorlg
dislance service company 765-4321,
Au&orizarion no.0123456,
Long distance no. 593-210-9576
OPulse mode is required by local access tele-
phone number of rlze alternate long disrance
service company.
Uervice of MCI, SPRINT, METRO or other
sysremk is used.
(Extension 11 only)
IFT THE HANDSET
R PRESS
SP-PHONE"
DIAL "77" ENTER ENTER
THE HOUR THE MINUTE'
(01 through (00 through
12) 59)
1: for PM
Description
When the present time is out of order,
yowl cm
adjust by following procedure.
Operation
I. Lifr rhe handser or press the SP-PHONE
burron on esrension II.
2. Dial (77).
3. Enter rhe hour with 2 digits.
(01 rhrough 12)
4.
Enter the minute wi,Ji
2
digits.
(00 rhrough 59)
5. Dial (0) for AM or (1) for PM:
6. Press the # burron.
7.
Wait for
the, corlfirnihriori rone.
Conditions
l
Instantly after pressing the # button, new time
counting lvi$tart.
y=&-..
Eve
*Time
setting
is .,,done through extension II- -;
only. .. ----.,