Date And Time Setting - Panasonic EASA-PHONE KX-T61610 Installation Manual

,........_......~....~-~~..-......__...._-._~.....-~.~.-..---~~....-..-..-..~.~--~-.~...
enter the year with 2 digits.
[87]: 1987year
i~~"~'~"~~"""""""""~."-~'-'.""~..~"."~""'.""".'~~'.
until the desired month is
displayed
,_.._.________..__.__.._..._.-~-........__.__...______.__
enter the day with 2 digits
,._...._____._._____..~~~.~~....._____.__
until the desired day
of the
week is displayed
' enter the hour with 2 digits
,..__..._____.........__..
;.'...'..""~'.' enter the minute with 2 digits
r.- until the desired AMIPM is
\ displayed
~~~~[NEXT~[~~[~~~SE~~~T~~O~I~~[~~[SE~~CT~I~I~~~[~~~~~[OI~SE~ECTI[MEMORY~[END]
[87 JAN. 01 THU 12:OO AM]...default
~
Description
Entry
of
the current day, date and time.
I!
Programming
1.
Dial (00).
"DAMTIME SET" will be displayed.
2. Press the NEXT button.
"87 JAN. 01 THU" will be displayed and
"87" will blink.
3. Enter the year (last 2 digits) using the
dialing button.
,.?
7. Press the "G" button.
"12: 00 AM" will be displayed.
8.
Enter the hour with 2 digits.
9. Press the "Q" button and then enter the
minute with 2 digits.
10.
Press the "0" button and then repeat
pressing the SELECT button until the
desired AM/PM is displayed.
Il.
Press the MEMORY button.
4.
Press the "0"
b
utton
and then repeat
pressing the SELECT button until the
desired month is displayed.
12. To return to the initial program mode, press
the END button.
5
. Press- the "0" button and then enter the
day with 2 digits.
6.
Press the "0" b utton and then repeat
pressing the SELECT button until the
,
Condition --
*If
"0" button is pressed, the display will
return to the previous sequence in the pro-
gramming step.
@Instantly after pressing the MEMORY button,
the new time will start.
desired day of the week is displayed.
3-4
But the LCD of extension I1 will display the
new time only after the Systey Program
Switch is set to SET.