Wireless Lan Card - Packard Bell EasyNote MB Series Disassembly Manual

Note: the screws stay attached to the cover.
3. Lift the door out.
4. The memory module(s) are located in the bottom middle of the
compartment. To release the modules, push the metal clips aside. This
will release the module.
Fig. 10 Removing the memory modules.
Note: it may be necessary to push the WLAN antenna aside to have enough clearance for
the left-side clip of the bottom SO-DIMM slot.
5. Lift the memory module out.
Note: In case you have 2 memory modules installed, you will need to remove the top memory
module before you can remove the module in the bottom memory slot.

Wireless LAN card

1. Remove the battery.
2. Remove the 4 screws for the large cover on the bottom of the unit.
EasyNote MB Disassembly Manual 8