Lcd Panel - Packard Bell EasyNote MB Series Disassembly Manual

LCD Panel

1. Remove the LCD Assembly as described above
2. Remove the 6 rubber stoppers in the LCD bezel.
Note: the 2 rubber stoppers used on the upper corners are different from the other 4 rubbers.
3. Remove the screws in the bezel.
4. Remove the LCD bezel; it is clicked in place.
5. Disconnect both cables from the inverterboard, and the cable
connected to the webcam.
6. Lift out the LCD panel.
7. Remove the 6 screws (3 at each side) to remove the LCD brackets.
Fig. 20 The LCD panel.
EasyNote MB Disassembly Manual 15