Packard Bell EasyNote MB Series Disassembly Manual page 10

5. Now disconnect the WLAN antenna. Note the colour of each wire that
is attached to each connector, to ensure proper reconnection during re-
assembly.
6. Remove the card from its slot.
Note: dependent on the model there may be 2 or 3 antennas. Some cards use ' main' and
' aux' instead of numbers to indicate the antenna connectors.
TV-Card (optional)
1. Remove the battery.
2. Remove the 4 screws of the cover on the bottom base (see Fig 9).
Note: the screws stay attached to the cover.
3. Lift the door out.
4. The TV-Card is located to the right bottom. Remove the screws
securing the card and lift it up.
5. Disconnect the antenna cable.
6. Lift out the card.
Fig. 13 The TV card.
EasyNote MB Disassembly Manual 10