Memory / Mini Pci - Packard Bell EasyNote M3 Disassembly Manual

3. Remove the 4 screws (F) from the CD-ROM bracket and take away
the CD-ROM bracket.

Memory / Mini PCI

1. Remove the 4 screws (G) that secure the memory expansion slot /
mini PCI cover to the notebook.
2. Lift one edge of the memory expansion slot / mini PCI slot cover up.
3. Remove the memory expansion slot / mini PCI slot cover.
Fig. 12: Removing the memory / mini PCI compartment cover
4. Spread the retaining tabs securing the memory expansion module to
the system board. The memory module will rise up at a 45-degree
angle.
5. Pull the memory module away from the SD-DIMM slot at a 45-degree
angle.
6. Spread the retaining tabs securing the mini PCI to the system board.
The mini PCI will rise up at a 45-degree angle.
7. Pull the mini PCI away from the mini PCI slot at a 45-degree angle.
Fig. 13: Removing the memory modules and the mini PCI
Fig. 11: Removing the CD-ROM bracket
Packard Bell Easynote M3 Disassembly Manual
9
(F)