Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Packard Bell EasyNote M3
Summary of Contents for Packard Bell EasyNote M3
- Page 1 Packard Bell EasyNote M3 Disassembly Manual...
-
Page 2: Table Of Contents
Battery Pack Heat Sink Keyboard CD/DVD Memory / Mini PCI LCD Assembly Keyboard Cover LCD Disassembly Inverter Board LCD Panel Base Assembly CMOS Battery Top Cover Touchpad System Board Modem Speakers Case Fan Notice Packard Bell Easynote M3 Disassembly Manual... -
Page 3: Overview
The instructions are illustrated where necessary with images of the part that is being removed or disassembled. Furthermore, the screws that are removed are shown next to the image of the parts themselves. Packard Bell reserves the right to make changes to the EasyNote M3 notebook without notice. Technician Notes Only technicians authorized by NEC Computers International B.V. -
Page 4: Hazardous Voltage
(un)installed in the computer. enlaces de telecomunicaciones, de red y de líneas de módem. No ponga en funcionamiento el sistema mientras la cubierta esté quitada. Packard Bell Easynote M3 Disassembly Manual... - Page 5 Zet de notebook nooit aan i collegamenti di comunicazione, reti als de behuizing geopend is. o linee di modem. Non avviare il sistema senza aver prima messo a posto il coperchio. Packard Bell Easynote M3 Disassembly Manual...
-
Page 6: Battery Pack
1. Remove the long (A) and the short (B) screw from the heat sink cover. 2. Slide the cover out a bit. 3. Lift one edge of the heat sink cover up. 4. Remove the heat sink cover. Packard Bell Easynote M3 Disassembly Manual... -
Page 7: Cpu
CPU. 7. Take out the heat sink. Fig. 4: Removing the heat sink 1. Lift up the lever to release the CPU. 2. Remove the CPU. Fig. 5: Removing the CPU Packard Bell Easynote M3 Disassembly Manual... -
Page 8: Hdd
Fig. 6: Removing the HDD cover 5. Remove the screw (D) securing the HDD assembly. 6. Slide out the HDD assembly. 7. Remove the 4 screws (E) securing the HDD to the HDD bracket. Fig. 7: Removing the HDD Packard Bell Easynote M3 Disassembly Manual... -
Page 9: Keyboard
Fig. 9: Disconnecting the flat keyboard cable CD/DVD 1. Remove the 2 screws (A) from the bottom base. 2. Push the metal pin in the HDD bay to release the optical drive. Fig. 10: Removing the CD/DVD drive Packard Bell Easynote M3 Disassembly Manual... -
Page 10: Memory / Mini Pci
The mini PCI will rise up at a 45-degree angle. 7. Pull the mini PCI away from the mini PCI slot at a 45-degree angle. Fig. 13: Removing the memory modules and the mini PCI Packard Bell Easynote M3 Disassembly Manual... -
Page 11: Lcd Assembly
(first remove the LCD hinge covers!) 1. Use a small flat bed screwdriver to release the keyboard cover. Fig. 16: Releasing the keyboard cover 2. Remove the keyboard cover. Fig. 17: Removing the keyboard cover Packard Bell Easynote M3 Disassembly Manual... -
Page 12: Lcd Disassembly
1. Remove the 2 screws (J) securing the inverter board. 2. Disconnect the LCD power cable. 3. Lift the inverter board and remove it from the system. 4. Remove the tape securing the inverter board cable to the back of the display panel. Packard Bell Easynote M3 Disassembly Manual... -
Page 13: Lcd Panel
8. Remove the 3 screws (G) securing the right bracket. 9. Remove the 3 screws (G) securing the left bracket. 10. Remove both brackets. 11. Disconnect the LCD cable and remove the tape securing the LCD cable. 12. Remove the LCD cable. Packard Bell Easynote M3 Disassembly Manual... -
Page 14: Base Assembly
Fig. 24: Releasing the base assembly 2. Remove the 14 screws (A) and 2 screws (B) from the bottom of the base assembly. 3. Lift away the bottom base assembly. Fig. 25: Removing the base assembly Packard Bell Easynote M3 Disassembly Manual... -
Page 15: Cmos Battery
4. Remove the LED board assembly. Fig. 27: Removing the LED board assembly 5. Remove the 3 screws (B) securing the ESB board to the top cover. 6. Lift the ESB board away from the top cover. Packard Bell Easynote M3 Disassembly Manual... -
Page 16: Touchpad
Fig. 29: Removing the top cover Touchpad 1. Remove the 9 screws (L) securing the keyboard plate to the top cover. 2. Lift away the keyboard plate from the top cover. Fig. 30: Removing the keyboard plate Packard Bell Easynote M3 Disassembly Manual... -
Page 17: System Board
2. Disconnect the left speaker cable. 3. Disconnect the right speaker cable. 4. Remove the screw (B) securing the system board. 5. Lift away the system board from the speaker assembly (I/O plate). Fig. 32: Releasing the system board Packard Bell Easynote M3 Disassembly Manual... -
Page 18: Modem
3. Turn over the I/O plate and remove the 2 screws (G) and remove the speaker. 4. Perform the same steps for the right speaker (with the long cable). Fig. 35: Removing the speakers Packard Bell Easynote M3 Disassembly Manual... -
Page 19: Case Fan
Case Fan 1. Remove the 3 screws (M) securing the case fan to the I/O plate. 2. Remove the case fan. Fig. 36: Removing the case fan Packard Bell Easynote M3 Disassembly Manual... -
Page 20: Notice
FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. Copyright © 2003 NEC Computers International B.V.. All rights reserved. Packard Bell is a trademark of NEC Computers International B.V.. The names of actual companies and products mentioned herein may be trademarks and/or registered trademarks of their respective owners.