Lcd Panel - Packard Bell EasyNote M3 Disassembly Manual

5. Remove the inverter board cable.

LCD Panel

1. Remove the 2 screws (A) securing the left hinge.
2. Remove the 2 screws (A) securing the right hinge.
3. Slide out the left and right hinge from under the LCD bracket.
Note
Mark the left and right hinge for position.
4. Remove the 2 screws (G) securing the LCD cover on the left.
5. Remove the 2 screws (G) from the LCD cover on the right.
6. Lift the LCD and the LCD bracket assembly away from the LCD back
cover.
7. Turn the LCD panel upside down (use foam to protect the screen).
8. Remove the 3 screws (G) securing the right bracket.
9. Remove the 3 screws (G) securing the left bracket.
10. Remove both brackets.
11. Disconnect the LCD cable and remove the tape securing the LCD
cable.
12. Remove the LCD cable.
Fig. 20: Removing the inverter board
Fig. 21: Releasing the hinges
Fig. 22: Removing the LCD panel
Packard Bell Easynote M3 Disassembly Manual
12