5. Remove four screws (4xC) from the HDD bracket.
6. Remove two screws (2xD) from the HDD bracket.
7. Remove the HDD bracket and connector.
Bottom Panel
Perform the following steps to remove the bottom panel:
1. Remove nine screws (9xA) and take away the bottom panel.
2. Remove the memory module.
3. Remove the Mini-PCI Wireless LAN card and disconnect the antenna
cable(s).
4. Remove the screws (2xA) from the modem.
5. Release the ground cable and modem.
6. Disconnect the modem cable from the modem.
Fig. 3
Removing the hard disk drive.
Fig. 4
Removing the bottom panel.
5