Trane CGAM Installation & Operation Manual page 28

Unit Dimensions/Weights
Pump Package, Partial Heat Recover and Buffer Tank - Water Connections
Figure 29. CGAM 20 and 26 ton - pump package, buffer tank, partial heat recovery unit water connections
Pump Package
Chilled
12.5 in (317 mm)
water
inlet
39.8 in
(1011 mm)
Water connections are recessed
1.3 in (33 mm) from unit end.
Figure 30. CGAM 30 and 35 ton - pump package, buffer tank, partial heat recovery unit water connections
Pump Package
Chilled
12.3 in (313 mm)
water
inlet
39.9 in
(1012 mm)
Water connections are recessed
1.3 in (33 mm) from unit end.
28
Buffer Tank
Chilled
water
inlet
Chilled
water outlet
12.8 in
(325 mm)
22.4 in
(569 mm)
9.7 in
(246 mm)
(531mm)
(757 mm)
Water connections are recessed
from unit end.
Outlet is 14.8 in (377 mm) and
inlet is 0.3 in (7.8 mm)
Buffer Tank
Chilled
water
inlet
Chilled
water outlet
12.9 in
(327 mm)
22.2 in
(564 mm)
9.7 in
(246 mm)
(531mm)
(757 mm)
Water connections are recessed
from unit end.
Outlet is 14.8 in (377 mm) and
inlet is 0.3 in (7.8 mm)
Chilled
water
outlet
22 in
(559 mm)
20.9 in
29.8 in
Partial heat recovery connections are even with unit edge.
The chilled water inlet and outlet connections are the same
as the standard unit unless pump package or buffer tank
are ordered.
Chilled
water
outlet
22 in
(559 mm)
20.9 in
29.8 in
Partial heat recovery connections are even with unit edge.
The chilled water inlet and outlet connections are the same
as the standard unit unless pump package or buffer tank
are ordered.
Partial Heat Recovery
Heating
67.4 in (1712 mm)
Heating
outlet
inlet
Partial Heat Recovery
Heating
67.4 in (1712 mm)
Heating
outlet
inlet
15.2 in
(385 mm)
6.9 in
(176mm)
15.2 in
(385 mm)
7.2 in
(182mm)
CG-SVX17E-EN