Trane CGAM Installation & Operation Manual page 108

Controls Interface
are displayed as spin buttons.The lower half of the screen
is reserved for help screens.
All setpoint subscreens will execute the equivalent of a
Cancel key if any display activities cause the subscreen to
be left before a new setpoint is entered. E.g. If Alarms key
is pressed before a new setpoint is entered, new setpoint
will be cancelled.The same applies to any time-outs.
Pressing the Auto or Stop keys will not cause a cancel
since the setpoint subscreen is not left on this action.
Enumerated Settings Subscreen
The enumerated setpoint subscreen has no cancel or enter
key. Once a radio key is depressed the item is immediately
set to the new enumeration value.
Mode Override Subscreens
The Mode Override subscreen has no cancel or enter key.
Once a radio key is depressed that new value is
immediately assumed.
Mode Override for Enumerated Settings is shown below:
108
Date/Time Subscreen
The setpoint screen for setting up the CH530 date is shown
below:The user must select Day, Month, orYear and then
use the up/down arrows to adjust.
The setpoint screen for setting up the CH530 time with a 12
hour format is shown below. User must select Hour, or
Minute, then use up/down arrows to adjust. Adjusting
hours will also adjust am/pm.
CG-SVX17E-EN