WARNING
Hazardous Service Procedures!
The maintenance and troubleshooting procedures
recommended in this manual could result in exposure
to electrical, mechanical or other potential safety
hazards. Always refer to the safety warnings provided
throughout this manual concerning these procedures.
Unless specified otherwise, disconnect all electrical
power including remote disconnect and discharge all
energy storing devices such as capacitors before
servicing. Follow proper lockout/tagout procedures to
ensure the power can not be inadvertently energized.
When necessary to work with live electrical
components, have a qualified licensed electrician or
other individual who has been trained in handling live
electrical components perform these tasks. Failure to
follow all of the recommended safety warnings
provided, could result in death or serious injury.
Introduction
Overview
This manual covers the installation, operation and
maintenance of the CGAM units.
Revision Summary
CG-SVX17E-EN
The following points describe the changes to this revision
of the manual:
•
High ambient option added
•
Copper fin option added
•
Seismically rated isolator option added
•
No Freeze Protection option added
•
Pump package option pressure drop information
revised
•
Maximum loop volume for pump package expansion
tank added
•
Diagnostics tables updated
Trademarks
Trane, CompleteCoat,Tracer and theTrane logo are
trademarks ofTrane in the United States and other
countries. All trademarks referenced in this document are
the trademarks of their respective owners.
CG-SVX17E-EN
Warnings, Cautions and Notices
3