Trane CGAM Installation & Operation Manual page 22

Unit Dimensions/Weights
Figure 18. CGAM 100, 110 and 120 ton- no options
Control
panel
Wire
connection
88.9 in
(2257 mm)
The number of fans shown does not represent the
number of fans installed.
Note: When facing the control panel, circuit 1 is on the right side of unit.
Figure 19. CGAM 100, 110 and 120 ton- service clearances and mounting locations
Service and Airflow
The number of fans shown does not represent the
number of fans installed.
Door
swing
47.2 in
(1200 mm)
1
More clearance may be needed for airflow
depending on the installation.
22
Fan
92.5 in
(2349 mm)
29.6 in
(751 mm)
111.7 in (2837 mm)
165.9 in (4214 mm)
1
Clearance
39.4 in
39.4 in (1000 mm)
39.4 in (1000 mm)
Compressor
Water connections are 5.4 in (139 mm)
from unit end.
Mounting Locations
Distance from edge to
middle of mounting hole
1.5 in (38 mm)
(1000 mm)
85.9 in
(2181 mm)
Control
panel side
30.2 in
89.2 in (2266 mm)
Total of six mounting locations.
Chilled water
inlet
Chilled water
outlet
31.1 in
(790 mm)
11.5 in 7.9 in
(199 mm)
(292 mm)
0.56 in (15 mm)
Hole dia
Chilled water
connection side
(767 mm)
146.9 in (3731 mm)
CG-SVX17E-EN