Draytek Vigor2920 Series User Manual page 96

Click any Index number link to access into the following page for configuring load-balance
policy.
Available settings are explained as follows:
Item
Enable
Protocol
Binding WAN interface
Src IP Start
Src IP End
Dest IP Start
Dest IP End
Dest Port Start
Dest Port End
After finishing all the settings here, please click OK to save the configuration.
Vigor2920 Series User's Guide
Description
Check this box to enable this policy.
Use the drop-down menu to choose a proper protocol for the
WAN interface.
Choose the WAN interface (WAN1 / WAN2 / WAN3) for
binding.
Auto failover to other WAN – Check this button to lead the
data passing through other WAN automatically when the
selected WAN interface is failover.
Type the source IP start for the specified WAN interface.
Type the source IP end for the specified WAN interface. If this
field is blank, it means that all the source IPs inside the LAN
will be passed through the WAN interface.
Type the destination IP start for the specified WAN interface.
Type the destination IP end for the specified WAN interface. If
this field is blank, it means that all the destination IPs will be
passed through the WAN interface.
Type the destination port start for the destination IP.
Type the destination port end for the destination IP. If this field
is blank, it means that all the destination ports will be passed
through the WAN interface.
88