Draytek Vigor2920 Series User Manual page 185

Each item is explained as follows:
Item
Set to Factory Default
Index
Status
You can set up to 15 schedules. Then you can apply them to your Internet Access or VPN
and Remote Access >> LAN-to-LAN settings.
To add a schedule, please click any index, say Index No. 1. The detailed settings of the call
schedule with index 1 are shown below.
Available settings are explained as follows:
Item
Enable Schedule Setup
Start Date
(yyyy-mm-dd)
Description
Clear all profiles and recover to factory settings.
Click the number below Index to access into the setting page of
schedule.
Display if this schedule setting is active or inactive.
Description
Check to enable the schedule.
Specify the starting date of the schedule.
177
Vigor2920 Series User's Guide