Draytek Vigor2920 Series User Manual page 292

Item
Router Name
Server IP Address
Destination Port
Enable syslog message
AlertLog Setup
Mail Alert Setup
Send a test e-mail
SMTP Server
Mail To
Return-Path
Authentication
Enable E-mail Alert
Click OK to save these settings.
For viewing the Syslog, please do the following:
1. Just set your monitor PC's IP address in the field of Server IP Address
2. Install the Router Tools in the Utility within provided CD. After installation, click on the
Router Tools>>Syslog from program menu.
Vigor2920 Series User's Guide
Description
Syslog server.
Check USB Disk to save the log to the attached USB storage
disk.
Display the name for such router configured in System
Maintenance>>Management.
If there is no name here, simply lick the link to access into
System Maintenance>>Management to set the router name.
The IP address of the Syslog server.
Assign a port for the Syslog protocol.
Check the box listed on this web page to send the
corresponding message of firewall, VPN, User Access, Call,
WAN, Router/DSL information to Syslog.
Check "Enable" to activate function of alert log.
Type the port number for alert log. The default setting is 514.
Check "Enable" to activate function of mail alert.
Make a simple test for the e-mail address specified in this
page. Please assign the mail address first and click this button
to execute a test for verify the mail address is available or not.
The IP address of the SMTP server.
Assign a mail address for sending mails out.
Assign a path for receiving the mail from outside.
Check this box to activate this function while using e-mail
application.
User Name - Type the user name for authentication.
Password - Type the password for authentication.
Check the box to send alert message to the e-mail box while
the router detecting the item(s) you specify here.
284