Draytek Vigor2920 Series User Manual page 172

To activate the function of limit session, simply click Enable and set the default session limit.
Available settings are explained as follows:
Item
Enable
Disable
Default session limit
Limitation List
Start IP
End IP
Maximum Sessions
Add
Edit
Vigor2920 Series User's Guide
Description
Click this button to activate the function of limit session.
Click this button to close the function of limit session.
Defines the default session number used for each computer in
LAN.
Displays a list of specific limitations that you set on this web
page.
Defines the start IP address for limit session.
Defines the end IP address for limit session.
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session
limit for the specific limitation you set for each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
164