Draytek Vigor2920 Series User Manual page 201

When you check IPSec, you will see the following graphic:
Available settings are explained as follows:
Item
Profile Name
User Name
Password
Pre-Shared Key
Confirm Pre-Shared
Key
Digital Signature
(X.509)
Peer IP/VPN Client IP
Peer ID
Remote Network IP
Remote Network Mask
After finishing the configuration, please click Next. The confirmation page will be shown as
follows. If there is no problem, you can click one of the radio buttons listed on the page and
click Finish to execute the next action.
Description
Type a name for such profile. The length of the file is limited
to 10 characters.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
For IPSec/L2TP IPSec authentication, you have to type a
pre-shared key.
Type the pre-shared key again for confirmation.
Check the box of Digital Signature to invoke this function.
Use the drop down list to choose one of the certificates for
using. You have to configure one certificate at least previously
in Certificate Management >> Local Certificate. Otherwise, the
setting you choose here will not be effective.
Type the WAN IP address or VPN client IP address for the
remote client.
Type the ID name for the remote client.
Please type one LAN IP address (according to the real location
of the remote host) for building VPN connection.
Please type the network mask (according to the real location of
the remote host) for building VPN connection.
193
Vigor2920 Series User's Guide