Draytek Vigor2920 Series User Manual page 249

Call Forwarding
DND (Do Not Disturb)
mode
CLIR (hide caller ID)
Call Waiting
Call Transfer
Default SIP Account
In addition, you can press the Advanced button to configure tone settings, volume gain, MISC
and DTMF mode. Advanced setting is provided for fitting the telecommunication custom for
the local area of the router installed. Wrong tone settings might cause inconvenience for users.
To set the sound pattern of the phone set, simply choose a proper region to let the system find
out the preset tone settings and caller ID type automatically. Or you can adjust tone settings
There are four options for you to choose. Disable is to close
call forwarding function. Always means all the incoming calls
will be forwarded into SIP URL without any reason. Busy
means the incoming calls will be forwarded into SIP URL only
when the local system is busy. No Answer means if the
incoming calls do not receive any response, they will be
forwarded to the SIP URL by the time out.
SIP URL – Type in the SIP URL (e.g., aaa@draytel.org or
abc@iptel.org) as the site for call forwarded.
Time Out – Set the time out for the call forwarding. The
default setting is 30 sec.
Set a period of peace time without disturbing by VoIP phone
call. During the period, the one who dial in will listen busy
tone, yet the local user will not listen any ring tone.
Index (1-15) in Schedule - Enter the index of schedule
profiles to control when the phone will ring and when will not
according to the preconfigured schedules. Refer to section
Application >>Schedule for detailed configuration.
Index (1-60) in Phone Book - Enter the index of phone book
profiles. Refer to section DialPlan – Phone Book for detailed
configuration.
Check this box to hide the caller ID on the display panel of the
phone set.
Check this box to invoke this function. A notice sound will
appear to tell the user new phone call is waiting for your
response. Click hook flash to pick up the waiting phone call.
Check this box to invoke this function. Click hook flash to
initiate another phone call. When the phone call connection
succeeds, hang up the phone. The other two sides can
communicate, then.
You can set SIP accounts (up to six groups) on SIP Account
page. Use the drop down list to choose one of the profile
names for the accounts as the default one for this phone
setting.
Play dial tone only when account registered - Check this box
to invoke the function.
241
Vigor2920 Series User's Guide