Draytek Vigor2920 Series User Manual page 242

Available settings are explained as follows:
Item
Index
Profile
Domain/Realm
Proxy
Account Name
Codec
Ring Port
Status
Vigor2920 Series User's Guide
Description
Click this link to access into next page for setting SIP account.
Display the profile name of the account.
Display the domain name or IP address of the SIP registrar
server.
Display the domain name or IP address of the SIP proxy
server.
Display the account name of SIP address before @.
Display the codec type for the account.
Specify which port will ring when receiving a phone call. Set
Phone, ISDN1-S0 or ISDN-TE as the default ring port for the
SIP account. If you choose Phone or ISDN1-S0, the ISDN2-TE
selection will be dimmed, vice versa. There are ten internal
lines with numbers (30 – 39) offered for ISDN-S0. You can
specify any one of them as ring port for specified SIP account.
By the way, ISDN-S0 can be used by mapping with MSN
numbers.
Show the status for the corresponding SIP account. R means
such account is registered on SIP server successfully. – means
the account is failed to register on SIP server.
234