Draytek Vigor2920 Series User Manual page 119

Item
Index
Comment
Local IP Address
Status
To add or edit port settings, click one index number on the page. The index entry setup page
will pop up. In each index entry, you can specify 20 port ranges for diverse services.
Available settings are explained as follows:
Item
Enable Open Ports
Comment
WAN Interface
Local Computer
Protocol
Start Port
Description
Indicate the relative number for the particular entry that you
want to offer service in a local host. You should click the
appropriate index number to edit or clear the corresponding
entry.
Specify the name for the defined network service.
Display the private IP address of the local host offering the
service.
Display the state for the corresponding entry. X or V is to
represent the Inactive or Active state.
Description
Check to enable this entry.
Make a name for the defined network application/service.
Specify the WAN interface that will be used for this entry.
Enter the private IP address of the local host or click Choose
PC to select one.
Choose PC - Click this button and, subsequently, a window
having a list of private IP addresses of local hosts will
automatically pop up. Select the appropriate IP address of the
local host in the list.
Specify the transport layer protocol. It could be TCP, UDP, or
----- (none) for selection.
Specify the starting port number of the service offered by the
local host.
111
Vigor2920 Series User's Guide