New Wall Construction - Dimplex BF9000 Owner's Manual

Fireplace Installation
Figure 1
8 ⅞"
(225.5 mm)

New Wall Construction

1. select a suitable location that
is not susceptible to moisture
and is away from drapes,
furniture and high traffic.
2. Place the fireplace in the
desired location to see how it
will look in the room.
3. mark the desired location
on the floor and store the
fireplace in a safe, dry and
dust free location.
4. Use studs to frame an
opening of 24 ½ inches (622
8
18 ¼"
(463.6 mm)
24 ½"
(622 mm)
mm) wide X 18 ¼ inches
(463.6 mm) high X 8 ⅞ inches
(225.5 mm) deep.
Option #1 - The power cord can
be lead from behind the trim
and along the wall to an outlet
near the fireplace.
Option #2 - A new outlet can be
installed inside the new frame
construction. Plug the unit into
a 15 Amp/120 Volt outlet. If
the cord does not reach, you
may use an extension cord
rated for a minimum of 1875
Watts.
www.dimplex.com