Dimplex BF9000 Owner's Manual page 11

Fireplace Installation
Front glass Installation
1. Carefully mount front glass
assembly so that the front
glass hooks (2) hang on the
front glass mounts on the
fireplace (2).
2. Use the supplied two (2)
Phillips sheet metal screws
to fasten the glass assembly
tabs to the fireplace (Figure
4).
3. Ensure the fireplace's main
on/off switch is switched
to the Off position (refer to
Figure 4
Tab
operation section).
4. If unit is not hard-wired, plug
fireplace into a 15 Amp, 120
Volt outlet (refer to noTE 1).
11