Dimplex BF9000 Owner's Manual page 10

Fireplace Installation
7. Connect the white wire
(neutral) from the unit to the
white wire from power supply
(Figure 4).
8. Connect the green wire
(ground) from the unit to the
green wire from power supply
(Figure 4).
9. Place all connectors inside
the unit and secure the
junction box cover to unit.
Ensure that the cable clamp
grips only the jacket of
service cable.
10
CAuTIon: Clearance for air
circulation beneath the fireplace
insert is provided by two (2) rub-
ber feet.
Do not install the fireplace
directly on carpet or similar
surfaces which may restrict air
circulation.
If installing the fireplace in a
carpeted area, place a one-piece,
solid, flat surface under the fire-
place insert. Ensure that both of
the insert's feet rest securely on
this surface.
www.dimplex.com