Battery Replacement; Remote Operation - Dimplex BF9000 Owner's Manual

Operation
Resetting The
Temperature Cutoff
Switch
should the heater overheat, an
automatic cut out will turn the
fireplace off and it will not come
back on without being reset. It
can be reset by switching the
main on/oFF switch to oFF and
waiting five (5) minutes before
switching the unit back on.
CAUTION: If you need to
continuously reset the heater,
disconnect power and call
Dimplex customer service at
1-888-DImPLEX
(1-888-346-7539).

Remote Operation

The fireplace is supplied with an
integrated on/off remote control
! NOTE: Ensure that the
fireplace Main ON/OFF
switch is set to the remote
control setting.
To operate, push the on button
to turn fireplace on, push the oFF
button to turn the fireplace off.

Battery Replacement

(Figure 6)
To replace the battery:
1. slide battery cover open
on the hand held
transmitter.
2. Install one 12-Volt (A23)
battery in the battery
holder.
3. Close the battery cover.
Remote Initialization
In the event that your remote
control ceases to operate
your fireplace, follow these
steps to re-initialize the hand-
held transmitter and the remote
Figure 6
ON
Button
OFF
Button
Battery
Battery
Cover
13