Dimplex DFP6848 Owner's Manual page 9

Site Selection and Preparation
3. mark the desired location
on the floor and store the
fireplace in a safe, dry and
dust free location.
4. Use studs to frame an
opening of 26 ½ inches wide
X 23 inches high (67.3 cm
wide X 58.4 cm high) allowing
a depth of 12 inches (30.5
cm) (Figure 2A).
5. Plan your electrical power
Figure 2
A
12"
(30.5 cm)
B
23"
(58.4 cm)
1
26 "
2
(67.3 cm)
23"
(58.4 cm)
12"
(30.5 cm)
1
26 "
2
(67.3 cm)
supply (refer to noTE 1).
Option #1 - The power cord can
be lead from behind the trim
and along the wall to an outlet
near the fireplace.
Option #2 - A new outlet can be
installed inside the new frame
construction (if allowed by
electrical code).
WARNINg: Construction and
electrical outlet wiring must
comply with local building
codes and other applicable
regulations to reduce the risk
of fire, electrical shock and
injury to persons.
Mantel Surround Kit or
Custom Made Mantel
Surround
1. select a suitable location that
is not susceptible to moisture
and is away from drapes,
furniture and high traffic.
2. Place the fireplace in the
desired location to see how it
will look in the room.
3. For ease of electrical hook
up you may wish to locate
the fireplace near an existing
outlet (refer to noTE 1).
4. store the fireplace in a safe
dry and dust free location.
9