Quick Reference Guide; Site Selection And Preparation - Dimplex DFP6848 Owner's Manual

Quick Reference guide

1. Before using the fireplace
verify:
• Are the circuit breakers for the
unit on?
• Are the light bulbs loose? (To
check, follow the instructions
for replacing the light bulbs
under the maintenance section
of this manual.)
2. If you have any technical

Site Selection and Preparation

This section provides easy step
by step instructions for selecting a
location and preparing the site to
install the fireplace
• Existing Fireplace
• New wall construction
• Dimplex mantel surround
kit or custom made mantel
surround
! NOTE:
The fireplace insert
comes completely assembled
and wired. some tools may
be required to prepare the site
and assembly/install the trim.
The dimensions of the
fireplace insert are 26 inches
(66 cm) wide X 22 ½ inches
(57.2 cm) high X 12 inches
(30.5 cm) deep (Figure 1). You
should allow ¼ inch (0.6 cm)
into:
questions or concerns
regarding the operation of your
electric fireplace, or require
service contact customer
service.
3. The heater may emit a slight,
harmless odor when first used.
This odor is a normal condition
caused by the initial heating of
internal heater parts.
around the fireplace insert for
ease of installation.
This fireplace does not require
any venting.
CAUTION: Clearance for
air circulation beneath the
Figure 1
7