Site Selection and Preparation
dry and dust free location.
! NOTE:
The dimensions of the
fireplace are 36 ½ inches (927
mm) wide X 31 ¾ inches (806
mm) high X 13 inches (330
mm) deep. The viewing area
Fireplace Installation
1.
Install the Bi-fold doors to the
fireplace.
!
IMPORTANT: Bi-fold doors
MUST be installed to the firebox
prior to installing firebox to
mantel.
Bi-fold Door Installation
(Figure 1)
i.
remove the Bi-fold doors
from packaging.
ii.
remove the Philips head
screw and the door spacer
from the bottom edge of the
Bi-fold door opposite of the
door handle.
iii. Insert the door spacer
into the bottom panel ledge
mounting hole.
iv.
Insert the top edge of the
Bi-fold door into the top door
track on the fireplace.
8
is 32 inches (813 mm) wide
and 28 ¼ (715 mm) high. The
fireplace does not require any
additional
venting.
v.
secure the Bi-fold door to
unit with supplied screw using
a short handled screwdriver.
!
NOTE: If short handled
screwdriver is not available tilt the
unit back.
Figure 1
Door
spacer
screw
Bi-fold
Door
Bottom
Mounting
Ledge
Hole
www.dimplex.com