Switching The Power On; Navigation Through The Menu - Viessmann VITOSOLIC 200 Installation And Service Instructions Manual

Switching the power ON

1. Check whether all electrical connec-
tions have been correctly made.
2. Check that the high limit safety cut-
out and temperature limiter (if
required) are connected.

Navigation through the menu

Controls
30.04.2009
Tcol
Tcylb
A
A Standard display
The standard display will automat-
ically show after approx. 4 min, if
no adjustments are made.
B OK key
■ Pressed once: Confirmation of
the menu selection
■ Pressed twice: Confirmation of
a value change
■ Calling up the main menu
■ Back to the standard display
from any menu
10:59
47.7 °C
35.4 °C
3. Switch ON the power; the solar con-
trol unit then begins an initialising
phase.
The standard display then appears
(see following diagram).
The solar control unit is now in auto-
matic mode.
B
■ Back to the previous menu point
■ Terminating an adjustment
already begun (the value
reverts to its previous setting)
/ Cursor keys
Navigation through the menu
The display can only show four
lines of the menu at a time. The
arrow on the l.h. side of the display
highlights the available menu
item.
Commissioning
79