Viessmann VITOSOLIC 200 Operating Instructions For The System User
Control unit for solar thermal systems
Hide thumbs
Also See for VITOSOLIC 200:
- Installation and service instructions manual (172 pages) ,
- Operating instructions manual (16 pages) ,
- Technical data manual (4 pages)
Related Manuals for Viessmann VITOSOLIC 200
Summary of Contents for Viessmann VITOSOLIC 200
- Page 1 VIESMANN Operating instructions for the system user Control unit for solar thermal systems VITOSOLIC 200 Please keep safe. 5608 437 GB 4/2014...
- Page 2 Safety instructions For your safety Please follow these safety instructions closely to prevent accidents and mate- rial losses. Safety instructions explained Appliance connection Danger ■ The appliance may only be connected This symbol warns against the and commissioned by authorised con- risk of injury.
- Page 3 Safety instructions For your safety (cont.) Auxiliary components, spare and wearing parts Please note Components that were not tested with the system may cause sys- tem damage, or may affect its functions. Have all installation or replace- ment work carried out by qualified contractors.
-
Page 4: Table Of Contents
Index Index Introductory information Commissioning..................... Operation......................Scanning options Calling up actual values..................Calling up messages.................... Scanning statement values.................. Calling up the heat amount.................. What to do if... The solar thermal system does not start.............. 11 There is no DHW available................... 11 The display is dark.................... -
Page 5: Introductory Information
Introductory information Commissioning The commissioning and adjusting of the control unit to local conditions and to building characteristics, plus the instruc- tion of the user in operating the system, must be carried out by your heating con- tractor. -
Page 6: Operation
Operation Operation Controls 30.04.2009 10:59 Tcol 47.7 °C Tcylb 35.4 °C Standard display Cursor keys The standard display is shown To scroll through the menu. automatically after approx. 4 min. Cursor keys OK key; to confirm your selection To adjust values. or save the setting. -
Page 7: Scanning Options
Scanning options Calling up actual values Press the following keys: for the following actual values, subject to system equipment for the "Main menu". level. 2. OK the first 3 actual values will be until the "Main menu" displayed. appears. "Actual values:" Explanation "Tcol"... -
Page 8: Calling Up Messages
Scanning options Calling up actual values (cont.) Actual cylinder temperature curve Heat amount in kWh HM 1 Tcylb today Collector temperature curve Note The bar on the very right indicates the value in kWh for the current day. Tcol today Calling up messages Press the following keys: 3. -
Page 9: Scanning Statement Values
Scanning options Scanning statement values Press the following keys: 5. OK to confirm. for the "Main menu". for the following statement val- ues, subject to system equip- for "Solar". ment level. 3. OK to confirm. until the "Main menu" appears. for "Statement". - Page 10 Scanning options Calling up the heat amount (cont.) until the "Main menu" appears. "HM ..." Explanation "Tflow" Flow temperature in °C "Tretn" Return temperature in °C "Heat" Heat amount in Wh "Heat" Heat amount in kWh "Heat" Heat amount in MWh Note Add the heat values together.
-
Page 11: What To Do If
What to do if... The solar thermal system does not start Cause Remedy The ON/OFF switch is switched off. Switch the ON/OFF switch ON. The solar control unit MCB has respon- Inform your local heating contractor. ded (mains voltage is present, display is not illuminated). -
Page 12: The Display Is Dark
What to do if... The display is dark Cause Remedy Power failure The solar control unit automatically re- turns to operation once the power supply has been restored. The power distribution MCB (main do- Check the MCB and inform your heating mestic MCB) has responded (no mains contractor if necessary. -
Page 13: Upkeep
Upkeep Inspection and maintenance DHW cylinder (if installed) Standards DIN 1988-8 and EN 806 spec- In addition for Vitocell 100: ify that maintenance and cleaning should We recommend that the correct function be carried out no later than 2 years after of the sacrificial anode is checked annu- commissioning and as required there- ally by your heating contractor. -
Page 14: Damaged Cables / Lines
If there is damage to the connecting cables or lines of the appliance or exter- nally installed accessories, these must be replaced with special cables or lines. Only use Viessmann cables / lines as replacement. For this, notify your quali- fied contractor. -
Page 15: Menu Overview
Menu overview Menu overview Subject to the specific system equipment level and range of functions (set by your heating contractor), the displays may vary from the examples illustrated here. Main menu Actual values Reports Solar Manual mode Messages: Operator code back No fault !Interruption... - Page 16 Contact your local contractor if you have any questions regarding the maintenance and repair of your system. You may, for example, find local contractors on the internet under www.viessmann.com. Viessmann Werke GmbH&Co KG Viessmann Limited D-35107 Allendorf Hortonwood 30, Telford...