Table of Contents
Advertisement
If the User Password Is Clear field (or Administrator
Password Is Clear) appears in the Security Menu,
the corresponding password feature is disabled.
(Your system is not password protected.)
How to Disable Password Protection
1.
From the Security Menu, highlight the "Set User
Password" or "Set Administrator Password" field
(depending on which password you disable).
2.
Type your password in the Enter Current Password
field, then press
3.
Don't type anything in the Enter New Password field —
just press
4.
Again, don't type anything in the Confirm New
Password field — just press
If the message "User Password Is Clear" (or "Administrator
Password Is Clear") appears in the Security Menu, the User
(or Administrator) password feature is disabled.
T
Clear User Password
This clears the user password.
T
User Setup Access
This option allows the user to have access to the BIOS
Setup utility. The choices are "Enabled" (default) or
"Disabled."
!
CAUTION
.
Enter
.
Enter
Enter
System BIOS and Utilities 4-19
.
Advertisement
Table of Contents
