Table of Contents
Advertisement
Remove the plastic blank panel from the selected slot
6.
by pressing the panel tab and swinging the blank panel
out.
Remove the metal slot cover by carefully pressing it
7.
until it breaks away from the chassis. Be careful of
sharp edges!
8.
Slide the device into the slot and secure the device.
9.
Connect the device cables (See "Cabling Storage
Devices").
10.
Replace the front panel (see "Replacing the Front
Panel").
11.
Replace the access cover (see "Replacing the Access
Cover").
Removing the blank panel
Installing Options 5-33
Advertisement
Table of Contents
