System Power Cables; Cabling Storage Devices - NEC PowerMate SPB-Boston User Manual

System Power Cables

Power cables come from the power supply and are attached
to the standard storage devices. System power cables vary
in length and provide connector sizes to accommodate a
variety of supported storage configurations. Power cable
connectors are keyed to fit only in the correct position. The
following figure shows the power cable connectors.

Cabling Storage Devices

All storage devices require a power and signal cable
connection. Devices shipped with the system are already
connected.
Procedures are provided on the following devices:
T
IDE device IDE hard disk drive, CD-ROM reader, or
Zip drive
T
accessible 5 1/4-inch device tape backup unit.
5-24 Installing Options
Power cable connectors