Table of Contents
Advertisement
After securing your system, reboot it and run the Setup
4.
program to set the new configuration.
EXTERNAL OPTIONS
This subsection includes installation procedures for the
following external options:
T
parallel printer
T
serial devices
Connecting a Parallel Printer
NOTE
sure the printer is set up correctly. Follow the setup
instructions that came with the printer.
Connect a parallel printer to the system as follows.
1.
Turn off power to the system and printer.
Connect the printer cable to the printer port on the rear
2.
of the system unit (see the following figure).
Secure the cable with the screws provided.
3.
Before connecting a printer to the system, be
Installing Options 5-37
Advertisement
Table of Contents
