Using A Password - NEC PowerMate SPB-Boston User Manual

Select "Set Supervisor Password" or "Set User
4.
Password" with the arrow keys and press
NOTE
requires that a password be entered before entering
the Setup Utility.
Setup displays a dialog box with the following
prompts:
5. Type your password and press
case-sensitive. Reenter your password and press
again.
Use the arrow keys to select Exit.
6.
Select "Exit Saving Changes." Press
7.
8. At the prompt, to confirm exiting setup, press
Your password takes effect the next time you power on
the system. You must enter a password the next time
you power on.

Using a Password

After you set your password in Setup and reboot the
system, a password prompt appears each time you power on
the system.
To use your password, type the password at the password
prompt and press
2-10 Using Your Computer
Enabling the Supervisor Password feature
Enter new password: [
Confirm new password: [
.
Enter
Enter .
]
]
Enter . Passwords are not
Enter
.
Enter
Enter .