Installing a DIMM
Use the following procedure to install a DIMM.
Remove the access cover (see "Removing the Access
1.
Cover").
Locate the DIMM sockets.
2.
Remove any currently-installed DIMMs that are not
3.
needed. See the previous section, "Removing a DIMM."
Before installing a DIMM, reduce static discharge by
touching the system's metal chassis.
4.
To install a DIMM, align the module with an empty
socket. Make sure that the notches on the DIMM line up
with the keys in the sockets.
!
CAUTION
Installing Options 5-17