Power Consumption; Output Dc Load Requirements - NEC PowerMate SPB-Boston User Manual

Table of Contents

Advertisement

This equipment has a 3-wire, grounded power cord. To
prevent electrical hazards, do not remove or defeat the
ground prong on the power cord if it gets damaged. Contact
your dealer or Authorized Service Provider for a
replacement.
In the U.S.A. and Canada, the power cord must be a
UL-listed detachable power cord (in Canada,
CSA-certified), type SV or SVT, 18 AWG, 3-conductor,
provided with a molded-on NEMA type 5-15 P plug cap at
one end and a molded-on cord connector body at the other
end. The cord length must not exceed 15 feet (4.5 meters).
Outside the U.S.A. and Canada, the plug must be rated for
250 VAC, 10 amp minimum, and must display an
international agency approval marking. The cord must be
suitable for use in the end-user country. Consult your dealer
or the local electrical authorities if you are unsure of the
type of power cord to use in your country.
NOMINAL LOAD OUTPUT

Power Consumption

Rated Output Power: 235W max.
B-14 System Specifications

Output DC Load Requirements

+3.3V
+5V
+12V
–5V
–12V
+5V
SB
CURRENT (Maximum)
14.0A
22.0A
8.0A
0.5A
0.8A
0.8A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Direction sp b-series

Table of Contents